实践展示openEuler部署Kubernetes 1.29.4版本集群
本文分享自华为云社区《openEuler部署Kubernetes 1.29.4版本集群》,作者:江晚正愁余。
一、Kubernetes集群节点准备
1.1 主机操作系统说明
序号 操作系统及版本 备注
1 CentOS7u9或 OpenEuler2203
1.2 主机硬件配置说明
需求 CPU 内存 硬盘 角色 主机名
值 8C 8G 1024GB master k8s-master01
值 8C 16G 1024GB worker(node) k8s-worker01
值 8C 16G 1024GB worker(node) k8s-worker02
1.3 主机配置
1.3.1 主机名配置
由于本次使用3台主机完成kubernetes集群部署,其中1台为master节点,名称为k8s-master01;其中2台为worker节点,名称分别为:k8s-worker01及k8s-worker02
# master节点 hostnamectl set-hostname k8s-master01 #worker01节点 hostnamectl set-hostname k8s-worker01 #worker02节点 hostnamectl set-hostname k8s-worker02
1.3.2 IP地址,名称解析与互信
#IP配置这里不再讲解 #下面是名称解析配置 [root@k8s-master01 ~]# cat /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.0.11 k8s-master01 192.168.0.12 k8s-worker01 192.168.0.13 k8s-worker02 #主机互信配置 [root@k8s-master01 ~]# ssh-keygen Generating public/private rsa key pair. Enter file in which to save the key (/root/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /root/.ssh/id_rsa Your public key has been saved in /root/.ssh/id_rsa.pub The key fingerprint is: SHA256:Rr6W4rdnY350fzMeszeWFR/jUJt0VOZ3yZECp5VJJQA root@k8s-master01 The key's randomart image is: +---[RSA 3072]----+ | E.o+=++*| | ++o*+| | . . +oB| | o . *o| | S o =| | . o . ..o| | . + . . +o| | . o. = . *B| | ...*.o oo*| +----[SHA256]-----+ [root@k8s-master01 ~]# for i in {11..13};do ssh-copy-id 192.168.0.${i};done /usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub" The authenticity of host '192.168.0.11 (192.168.0.11)' can't be established. ED25519 key fingerprint is SHA256:s2R582xDIla4wyNozHa/HEmRR7LOU4WAciEcAw57U/Q. This key is not known by any other names Are you sure you want to continue connecting (yes/no/[fingerprint])? yes /usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed /usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys Authorized users only. All activities may be monitored and reported. root@192.168.0.11's password: Number of key(s) added: 1
1.3.4 防火墙配置
所有主机均需要操作。
关闭现有防火墙firewalld
# systemctl disable firewalld
# systemctl stop firewalld
或
systemctl disable --now firewalld
查看firewalld状态
# firewall-cmd --state
not running
参考运行命令:
[root@k8s-master01 ~]# for i in {11..13};do ssh 192.168.0.${i} 'systemctl disable --now firewalld' ;done Authorized users only. All activities may be monitored and reported. Authorized users only. All activities may be monitored and reported. Authorized users only. All activities may be monitored and reported. [root@k8s-master01 ~]# for i in {11..13};do ssh 192.168.0.${i} 'firewall-cmd --state' ;done Authorized users only. All activities may be monitored and reported. not running Authorized users only. All activities may be monitored and reported. not running Authorized users only. All activities may be monitored and reported. not running
1.3.5 SELINUX配置
所有主机均需要操作。修改SELinux配置需要重启操作系统。
# sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config # sestatus
参考运行命令:
[root@k8s-master01 ~]# for i in {11..13};do ssh 192.168.0.${i} 'sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config' ;done Authorized users only. All activities may be monitored and reported. Authorized users only. All activities may be monitored and reported. Authorized users only. All activities may be monitored and reported. [root@k8s-master01 ~]# for i in {11..13};do ssh 192.168.0.${i} 'sestatus' ;done Authorized users only. All activities may be monitored and reported. SELinux status: disabled Authorized users only. All activities may be monitored and reported. SELinux status: disabled Authorized users only. All activities may be monitored and reported. SELinux status: disabled
1.3.6 时间同步配置
所有主机均需要操作。最小化安装系统需要安装ntpdate软件。
# crontab -l 0 */1 * * * /usr/sbin/ntpdate time1.aliyun.com for i in {11..13};do ssh 192.168.0.${i} ' echo '0 */1 * * * /usr/sbin/ntpdate time1.aliyun.com' >> /etc/crontab' ;done #设置上海时区,东八区 timedatectl set-timezone Asia/Shanghai for i in {11..13};do ssh 192.168.0.${i} ' timedatectl set-timezone Asia/Shanghai' ;done
1.3.7 升级操作系统内核
centos系统需要升级内容,具体百度,OpenEuler2203不需要
1.3.8 配置内核路由转发及网桥过滤
所有主机均需要操作。
添加网桥过滤及内核转发配置文件
sed -i 's/net.ipv4.ip_forward=0/net.ipv4.ip_forward=1/g' /etc/sysctl.conf # cat > /etc/sysctl.d/k8s.conf << EOF net.bridge.bridge-nf-call-ip6tables = 1 net.bridge.bridge-nf-call-iptables = 1 net.ipv4.ip_forward = 1 vm.swappiness = 0 EOF # 配置加载br_netfilter模块 cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf overlay br_netfilter EOF #加载br_netfilter overlay模块 modprobe br_netfilter modprobe overlay #查看是否加载 # lsmod | grep br_netfilter br_netfilter 22256 0 bridge 151336 1 br_netfilter # 使其生效 sysctl --system # 使用默认配置文件生效 sysctl -p # 使用新添加配置文件生效 sysctl -p /etc/sysctl.d/k8s.conf
1.3.9 安装ipset及ipvsadm
所有主机均需要操作。
安装ipset及ipvsadm # yum -y install ipset ipvsadm 配置ipvsadm模块加载方式 添加需要加载的模块 # cat > /etc/sysconfig/modules/ipvs.modules <<EOF #!/bin/bash modprobe -- ip_vs modprobe -- ip_vs_rr modprobe -- ip_vs_wrr modprobe -- ip_vs_sh modprobe -- nf_conntrack EOF 授权、运行、检查是否加载 chmod 755 /etc/sysconfig/modules/ipvs.module && /etc/sysconfig/modules/ipvs.module 查看对应的模块是否加载成功 # lsmod | grep -e ip_vs -e nf_conntrack_ipv4
1.3.10 关闭SWAP分区
修改完成后需要重启操作系统,如不重启,可临时关闭,命令为swapoff -a
永远关闭swap分区,需要重启操作系统
# cat /etc/fstab ...... # /dev/mapper/centos-swap swap swap defaults 0 0 在上一行中行首添加#
二、containerd容器环境安装
2.1 安装containerd环境包
所有主机均需要操作。
# 打包的文件 for i in {11..13};do ssh 192.168.0.${i} ' wget https://blog-source-mkt.oss-cn-chengdu.aliyuncs.com/resources/k8s/kubeadm%20init/k8s1.29.tar.gz'; done # 解压containerd并安装 for i in {11..13};do ssh 192.168.0.${i} ' tar -zxvf /root/k8s1.29.tar.gz'; done for i in {11..13};do ssh 192.168.0.${i} ' tar -zxvf /root/workdir/containerd-1.7.11-linux-amd64.tar.gz && mv /root/bin/* /usr/local/bin/ && rm -rf /root/bin'; done # 创建服务,所有主机都要操作 cat << EOF > /usr/lib/systemd/system/containerd.service [Unit] Description=containerd container runtime Documentation=https://containerd.io After=network.target local-fs.target [Service] ExecStartPre=-/sbin/modprobe overlay ExecStart=/usr/local/bin/containerd Type=notify Delegate=yes KillMode=process Restart=always RestartSec=5 # Having non-zero Limit*s causes performance problems due to accounting overhead # in the kernel. We recommend using cgroups to do container-local accounting. LimitNPROC=infinity LimitCORE=infinity # Comment TasksMax if your systemd version does not supports it. # Only systemd 226 and above support this version. TasksMax=infinity OOMScoreAdjust=-999 [Install] WantedBy=multi-user.target EOF # 启动容器服务 for i in {11..13};do ssh 192.168.0.${i} 'systemctl daemon-reload && systemctl enable --now containerd '; done # 安装runc for i in {11..13};do ssh 192.168.0.${i} 'install -m 755 /root/workdir/runc.amd64 /usr/local/sbin/runc '; done # 安装cni插件 for i in {11..13};do ssh 192.168.0.${i} 'mkdir -p /opt/cni/bin && tar -xzvf /root/workdir/cni-plugins-linux-amd64-v1.4.0.tgz -C /opt/cni/bin/ '; done # 生成容器配置文件并修改 for i in {11..13};do ssh 192.168.0.${i} 'mkdir -p /etc/containerd && containerd config default | sudo tee /etc/containerd/config.toml '; done # 修改沙箱镜像,所有主机都要操作 sed -i 's#sandbox_image = "registry.k8s.io/pause:.*"#sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.9"#' /etc/containerd/config.toml #重启containerd systemctl restart containerd
2.2 master主机安装k8s
# 配置k8s v2.19源,所有节点均要安装 cat <<EOF | tee /etc/yum.repos.d/kubernetes.repo [kubernetes] name=Kubernetes baseurl=https://mirrors.aliyun.com/kubernetes-new/core/stable/v1.29/rpm/ enabled=1 gpgcheck=1 gpgkey=https://mirrors.aliyun.com/kubernetes-new/core/stable/v1.29/rpm/repodata/repomd.xml.key EOF # 安装k8s工具,所有节点均要安装 yum clean all && yum makecache yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes # 配置kubelet为了实现docker使用的cgroupdriver与kubelet使用的cgroup的一致性,建议修改如下文件内容。所有节点均要安装 # vim /etc/sysconfig/kubelet KUBELET_EXTRA_ARGS="--cgroup-driver=systemd" 或是下面命令 echo 'KUBELET_EXTRA_ARGS="--cgroup-driver=systemd"' > /etc/sysconfig/kubelet systemctl enable kubelet #注意,kubelet不要启动,kubeadm会自动启动,如果已启动,安装会报错。 # 安装k8s命令,主master节点执行,这里只有1.29.4版本镜像 kubeadm init --apiserver-advertise-address=192.168.0.11 --image-repository registry.aliyuncs.com/google_containers --kubernetes-version v1.29.4 --service-cidr=10.96.0.0/12 --pod-network-cidr=10.224.0.0/16 # 最后执行以下命令 mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config export KUBECONFIG=/etc/kubernetes/admin.conf
2.3 安装calico网络插件
kubectl apply -f https://raw.githubusercontent.com/projectcalico/calico/v3.26.1/manifests/calico.yaml # 最后查看节点与pod支行情况 kubectl get nodes kubectl get pods -A
热门相关:校花之高手无敌 明尊 绝宠小医妃:王爷,来一针 鬼喊抓鬼 学霸你女朋友掉了